Bus assembly line manufacturers elaborate on the bus production process:

     Determine the routing plan according to the drawings → material selection → leveling → blanking → bending → punching or drilling → leveling of the contact surface → surface treatment of the contact surface → tinning → painting or coating → assembly (select bus assembly line) → Color label or spray mark color paint.

     Next, Suzhou Kai Aidi Electric Co., Ltd., a professional manufacturer of bus assembly lines, will briefly introduce how to determine the bus line plan.

     (1) According to the specifications and design drawings requirements and the installation of electrical components, in accordance with the horizontal, vertical, beautiful and material-saving principles to determine the line and bending form of the bus bar, the arrangement of the bus should be clear, the installation level is clear, and the appearance is neat and beautiful. The layout of busbars and busbars of the same product should be consistent and unified.

    (2) The electrical clearance and creepage distance between the exposed live conductors (copper bars) of different polarities in the low-voltage switchgear equipment and between them and the enclosure shall not be less than 20mm. High-voltage products comply with relevant standards.

     (3) Determine the blanking length by measuring and calculating methods according to the line and bending method.