Numerically controlled busbar punching and shearing machine The die of the busbar punching and shearing machine must be sharpened after being used for a long time, and the cutting edge surface must be demagnetized after grinding, and it must not be magnetic, otherwise it is easy to cause blockage.

    The elastic parts such as the spring of the busbar punching machine of CNC busbar punching and shearing machine are most easily damaged during the use process, and the phenomenon of fracture and deformation usually occurs. The method adopted is to replace. In the process of replacing the mold of the CNC busbar punching and shearing machine, you must pay attention to the specifications and models of the springs. The specifications and models of the springs are confirmed by color, outer diameter and length. It can be replaced only when the items are the same.

    During the use of the mold of the CNC busbar punching and shearing machine, the punches are prone to breakage, bending and gnawing, and the punch sleeves are generally gnawed. The damage of the punch and sleeve is generally replaced with parts of the same specification.

    The parameters of the punch head of the CNC busbar punching and shearing machine mainly include the size of the working part, the size of the installation part, and the length dimension. Fasten the parts, check whether the fastening parts are loose or damaged. The method adopted is to replace the parts with the same specifications.

    When maintaining the CNC busbar punching and shearing machine, check the relationship between the accessories of each part and whether there is damage, repair the damaged part, check whether there is air leakage in the pneumatic jacking machine, and take measures for the specific situation. If the trachea is damaged, replace it.